Does anyone know a cheap onlineshop who is selling halcyon gear and who
wouldt ship the items to Europe ?
Regards
Per

I need help:
I have an Uwatec Aladin Pro nitrox divecomputer and a Uwatec Memomouse.
When I try to transfer the dive data from the memomouse to my PC (with
Datatrak 3.06 installed) everything goes well until 98%. Then the

Would a semi-dry suit, similiar to the type worn by kayakers (i.e. less
expensive than the quality that a scuba diver would require.) be an
appropriate choice for snorkeling in Galapagos 70 degree water?
PJ905@hotmail.com

I am trying to decide between the Canon A610 and S60 which is the
better choice for my ameteur u/w photo needs.  The most important
differences between them:
They are the same price, about $299, and same resolution, 5 mp, so

My mask has a leak where the lens meets the frame.  It is a very small leak
and I am wondering if it can be repaired, and if so, how?  Can I put
something on it, like super glue?  The area seems to be only a millimeter or
2.

I have Good News.  Strange news, but good.
After reading rec.scuba.equipment archives on groups.google.com for a while
today, I found that some guys with my leaky-mask-due-to-facial-hair problem
had better results with a few specific masks.  One that was mentioned was

I'm building a small ROV, and to minimize the sealing hassles, I'm
thinking of pressurizing the body (with the electronics, motors, etc)
using a pony bottle of air and a scuba regulator.  (that and a small
relief valve ought to keep the body at roughly equal pressure to the

I am looking at an Oceanic 3mm farmer john suit.  I was wondering if the
sizing info they give is correct or do they run larger than advertised?
Thanks,  Greg

Hi all, sometimes i get a red tinge using Sea and Sea digital camera
when I am shooting a shot with alot of white in it. I am using a
strobe. Any ideas? TIA

What would be the best position for the drysuitzip, the back or the front?
And why?
Marc

About 10-11 years ago I got a good deal on Seapro gear, which I still
have and use.  I've always been curious as to how good this gear is.
Someone told me that Seapro uses various components in it's gear that
it copies from other manufacturers.  

Hi im trying to get in touch with Canadian divers please email me at
karlputter@hotmail.com

ANYONE VISITING AUSTRALIA WILL HAVE TO PAY LOTS EXTRA TO DIVE
have you all seen this proposal from the Australian NSW dept of Primary
Industies has put up?
fill out this survey it will only take you 30 seconds.

any suggestions for this newbee about what mask that works for people
with beards--with mustasch
tia
peter

Doe's anyone know where I can get a dive table online (just a printed one).
John