Anyone know where I can get a good underwater camera case for my Olympus
C-3040 digital camera?  Ikelite has one for $600, but that can't be the
real price....there must be one cheaper - correct?
Thanks

I just bought (on ebay) a Genesis 4 gauge console & am trying to connect it
to my aged (but recently serviced) Sherwood regulator's first stage. The
(male) connector of the console is to large to fit into the (female)
connection on the first stage?? Is there a way to connect ...

I am curious if the Sea Pearls plain (uncoated) weights will mark up our
BCD's.  We use coated weights now, but since the plain, uncoated ones are
cheaper, I would like to try them.  We have Zeagle's, and have the little
yellow pouches, but it is simpler to just stuff the weights ...

how i know what knife to use ?
BBC

Any comments about this new BC?  I'm looking forward to buy this new BC.
What is more improved compared to the previous or other BC?
stf.owd@gmail.com
STF

Hey guys , if you have a big barracuda photo please linkme the site is
for a school proyect .
TX
BBC

just bought a pair of used scuba pro sea wing fins and wont be able to dive
them for  a couple weeks..anyone used these before and what are your thoughts
on them???

I just purchased a 4 gauge console (from ebay) to connect to my old (but
just serviced) Sherwood regulator. Is it easy to connect or should I have my
local dive shop do it?

Trying to find the software for AWAC 1 to download to computer, PLEASE any
help greatly appreciated.

Where'd you get your 3mm wetsuit?

Just wondering if any of you had any suggestions for a dive computer as I am
trying to decide on one.
Considering Suunto vyper, Versapro 2.0, veo 180 and the aeris atmos2 any
thoughts anyone has would be appreciated.

I am a 58 year old, experienced scuba diver (with over 20 years of diving
under my belt) who was hit by a car in 1989 & hasn't been diving since. I
now want to get back into the sport but, having been away from it for so
long I decided to take a basic "Open Water Diver" course at ...

I discovered three small (about 3 mm) horizontal slits in my latex wrist
seal and was wondering if there is a temporary fix that would get me through
a few dives before I have the seal replaced. Anybody have any ideas? The
slits are about 2 inches from the end of the cuff. Thanks ...

I had a bubble in my gauge and daftly took the screw on the back off
What liquid is inside is it some sort of oil
Can I refill using a suringe in the fill hole at the top or is it under a
set pressure

is there a universal tank valve to regulator o-ring size?
k-valve
and if so
does anybody know what it is?