Home | Contact Us | FAQ | Search & Site Map | Link to Us
Sign In | Join | Other 45 Sites in Network
Home
ArticlesDiving DestinationsLearning Scuba DivingMarine LifeMiscellaneous
Discussion GroupsGeneralScuba EquipmentScuba LocationsAustralian ScubaUK Scuba
DirectoryScuba Clubs

Scuba Forum / General / September 2006

Tip: Looking for answers? Try searching our database.

What is the minimum safe operating temperature of a scuba tank?

Thread view: 
Enable EMail Alerts  Start New Thread
Thread rating: 
Bill J. - 17 Sep 2006 22:59 GMT
What is the minumum temperature that a fully pressurized 3000 psi
aluminum scuba tank can safely withstand for an indefinite period?
Lee Bell - 17 Sep 2006 23:53 GMT
> What is the minumum temperature that a fully pressurized 3000 psi
> aluminum scuba tank can safely withstand for an indefinite period?

Now there's an interesting question.  I haven't a clue.

Lee
Tina - 18 Sep 2006 00:27 GMT
> > What is the minumum temperature that a fully pressurized 3000 psi
> > aluminum scuba tank can safely withstand for an indefinite period?
>
> Now there's an interesting question.  I haven't a clue.
>
> Lee

But I was told that tanks should be emptied before storage for a long
time ..
About temperature, just avoid the extremes ?
Popeye - 18 Sep 2006 00:49 GMT
>> > What is the minumum temperature that a fully pressurized 3000 psi
>> > aluminum scuba tank can safely withstand for an indefinite period?
[quoted text clipped - 6 lines]
> time ..
> About temperature, just avoid the extremes ?

 I saw a chart today that indicated Viton O-rings were good from 50 below
to 200 above Fahrenheit.

 I don't know about the aluminum, but considering aircraft construction and
flight temps, I would think that the aluminum would survive at any
temperature within a relatively normal climate.

Signature

                                 Popeye
       It is the mark of an educated mind to be able to
     entertain a thought without accepting it. - Aristotle
                     www.finalprotectivefire.com

Lee Bell - 18 Sep 2006 01:50 GMT
> But I was told that tanks should be emptied before storage for a long
> time .. About temperature, just avoid the extremes ?

It seems you've been told a lot of things that differ from what others
believe or were told.  Most people, including me, believe that tanks should
not be emptied but, instead, should have at least 50 psi in them, give or
tank.  Mine are generally stored full, but they're not in long term storage.
They're usually stored for no more than a year.

Lee
Dillon Pyron - 18 Sep 2006 21:37 GMT
>> But I was told that tanks should be emptied before storage for a long
>> time .. About temperature, just avoid the extremes ?
[quoted text clipped - 6 lines]
>
>Lee

Mine always get put up with 500 psi.

Air in the tanks keeps water in the atmosphere from getting in.
Signature

dillon

If you can't figure out how to unmunge my
address, email me and I'll explain it.

Chris Guynn - 18 Sep 2006 22:29 GMT
> >> But I was told that tanks should be emptied before storage for a long
> >> time .. About temperature, just avoid the extremes ?
[quoted text clipped - 10 lines]
>
> Air in the tanks keeps water in the atmosphere from getting in.

What a concept.  Now if only we could bottle that and find a way to make it work on in-laws...
James Connell - 18 Sep 2006 03:43 GMT
> But I was told that tanks should be emptied before storage for a long
> time ..

Never 'emptied', but with just enough pressure in it to assure it stays
above ambient. That way no outside air( and it's water) gets in.
Dillon Pyron - 18 Sep 2006 00:48 GMT
>What is the minumum temperature that a fully pressurized 3000 psi
>aluminum scuba tank can safely withstand for an indefinite period?

Operating (subject) or storage.  Obviously, once you hit 32 degrees,
operation of the tank is no longer an issue.  If you're talking about
storage, it the termperature at which Al becomes brittle.  Look it up
in your CRC.
Signature

dillon

If you can't figure out how to unmunge my
address, email me and I'll explain it.

pugetsounddiver@gmail.com - 18 Sep 2006 20:15 GMT
> What is the minumum temperature that a fully pressurized 3000 psi
> aluminum scuba tank can safely withstand for an indefinite period?

Since AL tanks are used in every diving environment on earth, I would
say that you need not worry.
Lee Bell - 18 Sep 2006 21:27 GMT
> Since AL tanks are used in every diving environment on earth, I would say
> that you need not worry.

What if he's not planning on using it for diving.  I have an 80 cubic foot
Luxfer in the corner of our bedroom that's never been using for anything
except O2.  It's not medical O2, you understand, just O2.

Lee
mike gray - 19 Sep 2006 02:24 GMT
>>What is the minumum temperature that a fully pressurized 3000 psi
>>aluminum scuba tank can safely withstand for an indefinite period?
>
> Since AL tanks are used in every diving environment on earth, I would
> say that you need not worry.

Is Al used when diving in liquid Nitrogen?

I have to recover some dropped fetuses at my local fertility clinic.
Scott - 19 Sep 2006 02:26 GMT
> > Since AL tanks are used in every diving environment on earth, I would
> > say that you need not worry.

> Is Al used when diving in liquid Nitrogen?

> I have to recover some dropped fetuses at my local fertility clinic.

Bastard.
El Mecky - 19 Sep 2006 08:59 GMT
I'd definately wear my weazle then. Drysuit might not be necessary, as you
won't get wett.

frank
news - 21 Sep 2006 04:14 GMT
> What is the minumum temperature that a fully pressurized 3000 psi
> aluminum scuba tank can safely withstand for an indefinite period?

Here is some info:

http://www.luxfercylinders.com/support/maintenance/cm5.shtml

Jay
http://www.divewithjay.com
 
Sign In
Join
My Latest Posts
My Monitored Threads
My Blog
My Photo Gallery
My Profile
My Homepage

Start New Thread
Enable EMail Alerts
Rate this Thread



©2008 Advenet LLC   Privacy Policy - Terms of Use
This website includes both content owned or controlled by Advenet as well as content owned or controlled by third parties.