Home | Contact Us | FAQ | Search & Site Map | Link to Us
Sign In | Join | Other 45 Sites in Network
Home
ArticlesDiving DestinationsLearning Scuba DivingMarine LifeMiscellaneous
Discussion GroupsGeneralScuba EquipmentScuba LocationsAustralian ScubaUK Scuba
DirectoryScuba Clubs

Scuba Forum / General / April 2004

Tip: Looking for answers? Try searching our database.

tusa liberator mask lens installation

Thread view: 
Enable EMail Alerts  Start New Thread
Thread rating: 
Mark Zerr - 27 Apr 2004 21:53 GMT
I bought a TUSA liberator mask about 5 years ago.  I had prescription
lenses installed by the dealer at that time.  Now I would like to put
the placebo or standard lens back in and remove the prescription
lenses.  I use soft contacts now, and prefer them over the
prescription lenses in my current mask.  I know it is supposedly very
simple to change the lenses without having to pay a technician at a
dive center, but I no longer have the manual, and google has not
turned up any helpful information.  I believe I see how to install the
lenses, but I wanted to be sure I would not damage the mask in the
process.  It appears the part of the mask that holds the lenses is
isolated from the water tight portion of the mask.  Does anyone know
the process, or am I better off having a technician change the lenses?

Thanks,

Mark
Robert \ - 28 Apr 2004 06:35 GMT
> I bought a TUSA liberator mask about 5 years ago.  I had prescription
> lenses installed by the dealer at that time.  Now I would like to put
[quoted text clipped - 12 lines]
>
> Mark

A five year old mask requires a delicate expert touch.

Balance the cost of a dive shop bench job against a new mask. Might be
pretty close.
--
Robert "Doc" Adelman, C.I.D.

"I'm hiding in Honduras,
I'm a desperate man-
Send lawyers, guns & money-
the sh*t has hit the fan."
-Warren Zevon
Lee Bell - 28 Apr 2004 15:40 GMT
"Robert "Doc" Adelman, C.I.D." <lawyers-guns-money@worldnet.att.net> wrote

> > I bought a TUSA liberator mask about 5 years ago.  I had prescription
> > lenses installed by the dealer at that time.  Now I would like to put
[quoted text clipped - 8 lines]
> > isolated from the water tight portion of the mask.  Does anyone know
> > the process, or am I better off having a technician change the lenses?

I agree with Doc's assessment of the delicate nature of the mask, but I'm
not sure a tech will do better, or protect you if things go bad.  I have two
of the masks and changing the lenses is pretty simple.  I'll check for sure
when I'm  home, but my recollection is that you remove the clip in the
center of the top of the mask and the frame, which holds everything
together, separates from the mask.   You then replace the  lenses, replace
the frame and replace the clip.  The clip and frame are at risk.  If my
instructions are not obviously right when you look at your mask, DON'T
FOLLOW THEM.   I don't have a mask in front of me.

I hope you have  the original lenses.   I ran into this problem when I did
the same thing you're doing.  I bought a mask with perscription lenses in it
for my father.  He returned it when he had an eye operation that improved
his vision enough that  he didn't need the lenses any more.  A friend wanted
the same  lenses and wished to swap some standard ones for them.  It turned
out that her mask was newer than mine and lenses were not interchangeable.
We swapped masks instead.  I didn't really want a pink mask and she didn't
really want a red  one, but both of us got something usable in the trade.

Lee
Mark Zerr - 28 Apr 2004 16:08 GMT
> A five year old mask requires a delicate expert touch.
>
[quoted text clipped - 8 lines]
> the sh*t has hit the fan."
> -Warren Zevon

Yes...I agree...upon further evaluation, I will let the experts handle
it.  Trying to be a penny pincher is not always the best route.

Mark
Mark Zerr - 30 Apr 2004 03:16 GMT
> Yes...I agree...upon further evaluation, I will let the experts handle
> it.  Trying to be a penny pincher is not always the best route.
>
> Mark

Well...I visited my dive shop, and they showed me how to change the
lenses.  Very simple and easy as long as you are careful not to break
the retaining clips and bridge clip.  Now I can switch back and forth
on the fly during my dive days.   This is great!!!

Mark
 
Sign In
Join
My Latest Posts
My Monitored Threads
My Blog
My Photo Gallery
My Profile
My Homepage

Start New Thread
Enable EMail Alerts
Rate this Thread



©2008 Advenet LLC   Privacy Policy - Terms of Use
This website includes both content owned or controlled by Advenet as well as content owned or controlled by third parties.